#Mac uninstall drobo dashboard Pc

Yes… is unfortunate that Drobo 5N does NOT have a web config tool.ĭoing a PIN-HOLE reset with Drives, will WIPE OUT and FORMAT all existing data and reset all network, user, shares setting by to factory default which is liked all NEW fresh Drobo 5N. The ONLY way to set the Drobo 5N back to DHCP setting from a STATIC IP, is to use the Dashboard. This should in general resolved most of the Dashboard not discovering Drobo 5N issue. NO SEE BELOW! For info, Perform the pinhole reset and confirm that the Dashboard can find the Drobo then power down, re-install your drives (they don’t need to go back into their original slots) and finally power up again. It will also delete all your data so power down first and remove all your drives to keep your data safe. The pinhole reset 58 will change all settings to the factory defaults, of which DHCP is one.

#Mac uninstall drobo dashboard Pc

Then you have to manually set the MAC or PC ethernet port (network port) to a static IP that match the Drobo’s subnet. 192.168.20.1), and is directly connected to a Mac or PC. If the Drobo is set to a specific IP (e.g.

Both devices will negotiate a Private IP to comms each other. In this case, using a normal network cable connect the both directly. The PC or Mac Ethernet port (network port) is set to DHCP, and DROBO is also on DHCP. When a Drobo FS/5N/B800FS/B810N is directly connect to a PC or Mac without any router in between, make sure the following: DDService64d) and choose “allow incoming connections.”Once complete, click “OK”, then the lock symbol.Close, then restart the Drobo Dashboard. Go to “System Preferences” and open “Security & Privacy.”Click on the lock symbol in lower-left and prepare to login.Click on “Firewall”, then “Advanced” (lower-right).Highlight each application above (e.g. Other reason why Dashboard not detecting is that Dashboard related programs are blocked by OS firewire or some 3rd party security programs.ģrd Party Firewalls and Anti-Virus programs can sometimes interfere with the Drobo Dashboard, try disabling to determine if this is the issue. If NOT, a conflict IP might happen meaning the DHCP may serves the SAME IP to another DHCP client. So if the PC/Mac is not on the same subnet as the Drobo 5N/FS etc… then it will not able to detect it.Īnd IF you have manually set the Drobo to a STATIC IP, … make sure that this Static IP is OUT of the serving range of the DHCP server.

Meaning these Drobos will obtain an IP automatically from your home router or office DHCP server.ĭrobo Dashboard installed on PC or Mac should be able to auto detect the Drobo on the LAN, but they have to be on the same subnet. NOTES from tech support and DROBO users group. Try at your own risk! We had multiple back-ups so we just burned hours not data. Make a back up of your drobo first! We had 2 backups. Drobo tech support also sent me links to their instructions. Eero tech support offered help but the replaced 5N2 fixed the issue and I didn't continue with that process. I would not recommend the Eero router for a office except that is has great Wifi for your phones. The Eero router also wiped out a old Epson 9600pro plotter which now has to be used as a shared printer. I tried the pin hole reset at work connected to the Eero router for a good 2-3 hours and gave up. We replaced the office Drobo with a 5N2 and migrated the drives. I suspect the Eero Router is not compatible with devices that ping the net to automatically be discovered. After 20 or so resets I have the 5N connected to a Netgear Orbie (mesh) router at home after doing the pin hole reset and connecting directly to a mac via ethernet port. The installer said it was old tech vs new tech.

The Drobo 5N stopped showing up in Dashboard and would only connect if you used finder to connect to server manually. We had the same thing happen to our office DROBO 5N except that management replaced an old apple router with a new Eero router.